#Tnt audio garrard zero 100 mod
#Tnt audio garrard zero 100 full
#Tnt audio garrard zero 100 series

It seems that this powerful bass range is one of the pluses of other Garrard turntables such as the Slate Audio 301's and 401's. Let me say that this bass range is amazing: powerful to a point that even modern CD players seem a bit shy when compared to it. While the bass of the Rega is usually dry, the one of the Garrard is softer. For example, think of the bass range of a Rega Planar 3: well, the Zero 100 is exactly its opposite. The bass and the mid-bass range are powerful, even if sometimes the lower bass is out of control.

#Tnt audio garrard zero 100 full

So you have the feeling of a sometimes big and lazy sound, compact, full bodied and not particularly refined. The Garrard Zero 100 SB is a turntable that imposes its sonic fingerprint :-) to any cartridge: its sound is warm, plenty of bass and softly rooled-off in the mid-to-high range. The interconnects were from Eagle Cable (budget stuff) and the mat was the original, ugly, rubber one. I've also used a modern Gardo cartridge, the ZF 2 model. I've used three different cartridges: two old pick-ups of the same period (the 70s): an ADC 220 XE and a wonderful Excel ES 70 EX.

#Tnt audio garrard zero 100 mod

These listening test notes are referred to the turntable after the restoration but before that any mod or tweak was applied. This listening test has been quite long and several different HiFi systems have been used and matched to the Garrard, even one from the Seventies (Galactron MK10B amplifier, Goodmans loudspeakers)!!! Now the Zero 100 SB is playing in my secondary HiFi reference system (a budget one). I hope you've already read the introductory article about this turntable so that I can concentrate on the listening test notes only. Garrard Zero 100 SB turntable Listening test Click for full-size image

What size plinth do I need for a Garrard turntable?.

Garrard and Company was the first iteration of the company that would go on to manufacture Garrard turntables.

#Tnt audio garrard zero 100 series

The 301 and 401 are not dissimilar to 1200 series Dual turntables in that they are sturdy, well built idler drive turntables.

What is the difference between Garrard 301 and Garrard 401 turntables?.

Once properly set up, a Garrard 401 tends to run forever. This is easily done in the UK by a company called Loricraft who will tune up your old 401 to make it at least as good as new.

How long do Garrard 401 turntables last? ДЇor an excellent quality turntable, that is pretty good bang for buck, but these dinosaurs often need restorations.

Other Garrard turntables are worthwhile if found in good working order, but unless you have experience restoring vintage turntables, the cost of a restoration will outweigh the benefits a good Garrard can provide. These are the Garrard 301 and Garrard 401.

Are Garrard turntables worth the money? ДЄ couple of Garrard turntables have been elevated to cult status.

The 8 best vintage turntables - The Vinyl Factory.

Unlike its cousin the 301, the 401 is less sought after, and as a result it is cheaper. The Garrard 401 is an extremely good choice for a vintage turntable.

Garrard 401 Turntable Review | Best Turntables.

Other Garrard turntables are worthwhile if found in good working order, but вЂ¦

Garrard Turntables | Best Turntables ДЄ couple of Garrard turntables have been elevated to cult status.

Their famous plinth is essentially a 25mm thick piece of MDF with 4 squash balls with yellow dots supporting the MDF. The folks at Loricraft manufacture such plinths, and their opinion with Garrard turntables is to use a fairly thin (around 25-30mm, or one inch) wooden plinth. What size plinth do I need for a Garrard turntable? What is the difference between Garrard 301 and Garrard 401 turntables? How long do Garrard 401 turntables last?ДЇor an excellent quality turntable, that is pretty good bang for buck, but these dinosaurs often need restorations. A couple of Garrard turntables have been elevated to cult status.